STEP 1

When you get the box home, start with and put in all the included cables

and use internet cable if you have poor wifi.

Now you start up the box and let it install everything.

But you're not quite done yet!

Now go up to the gear in the upper right corner

Then go to update and install latest firmware etc.

STEP 2

Select EDIT PORTAL.

    IMPORTANT TO SEND THE CORRECT ID NUMBER * Mac address * which you will find inside the edit portal. SEE PICTURE RIGHT
    In Portal Nickname, write what you want the portal to be called
    In Portal URL, enter the portal we send to you by e-mail
    After filling in the link on the PORTAL URL, press the BACK button on your remote control
    You should not check Login Required
    If you have done everything right now, the portal will start up
    If it does not start, you should see if you sent the correct ID number and wrote off the portal correctly that we sent to you!

Step 3

    When the portal has loaded everything, press the menu button on the box
    Now go to settings
    Go down and change Buffer Time to 3 Sec
    Scroll down until you find Epg Mode change it to Normal
    If Channel List Style is not on Classic, we think you should change it to it, Then the layout will be much better and it is simpler and smoother
    Now that you have changed all this, go out and start a channel
    The box will ask if you want to download audio files and you should do so
    Once installed, the sound will disappear on some channels BUT do a reboot and the sound is back
    To add text on certain channels, etc., you must PRESS RED BUTTON then there will be a small pop up at the top left of the TV

Now you sit back and relax because now you are done